Get the most out of Rifle Rods and Handgun Hangers!
 |
The most efficient way to use Rifle Rods is to make Line guns with iron sights along the back wall of the safe.
If using both Rifle Rods and Handgun Hangers, |
 |
Give your safe easier access - even guns in the back!
 |
EASY ACCESS SETUP Use this setup if you have enough room and are looking for your guns to be easy to access.
Continue this pattern for any sized space. Reach through the open rows to grab the gun you need. When using this pattern you will never need to move any guns out of the way to get to the one you need - even if it's the gun in the back! |
Handgun Hanger Tips
All gun lengths and weights are different. Some shelves are thicker than others. We've made Handgun Hangers so they can adjust to fit just about all of them!
 |
Handgun Hangers are reversable to fit different thicknesses of shelves. One side will fit a 3/4" to 7/8" thick shelf. The other side will fit a 1" thick shelf. |
 |
The most important thing to do with Handgun Hangers is to adjust the prongs to fit your shelf and weight of gun. If the Handgun Hanger is not tight on the shelf, pull the prong downward to create an over bend until it has a nice grip on the shelf. The vinyl caps will help with this as well. If you have a weighty gun, pull the prong upward to create an over bend. The weight of the gun should level out the prong for an even hold. |
Kikstand Tips
 |
For the most stability, adjust the upper prong to the desired presentation of your guns. Leave the handle of the gun on the floor of the cabinet for stability. For additional stability, we recommend using Scotch® Restickable Strips. Directions to use Scotch® Restickable Strips: 1. Wrap Scotch® Restickable Strips around the wire at three seperate locations. 2. Put guns on Kikstands and adjust angle to create a uniform position for all guns on the shelf. DO NOT adjust angle while on glass shelf! 3. Arrange guns into desired locations. Press down to secure. |
